Datasheet

RGB SMD LED, 1204
3.6. Because different board designs use different number and types of devices, solder pastes, reflow ovens, and circuit boards,
no single temperature profile works for all possible combinations.
However, you can successfully mount your packages to the PCB by following the proper guidelines and PCB-specific
characterization
4. Drive Method
4.1. An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel
in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each
LED as shown in Circuit A below.
Circuit model A Circuit model B
LED LED
a. Recommended circuit.
b. The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs.
Art. Nr.
RND 135-00250
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com