Datasheet

SMD LED
Electrical Optical Characteristics at Ta=25℃
Notes:
a. Derate linearly as shown in derating curve.
b. Duty Factor = 10%, Frequency = 1 kHz
Notes:
a. ALuminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response
curve.
b. 2θ1/2 is the o -axis angle where the luminous intensity is 1⁄2 the peak intensity
c. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which
defines the color of the device.
Absolute Maximum Ratings at Ta=25
℃
Pa
rameters Symbol Max Unit
Power Dissipation Pd 90X3 mW
Peak Forward Current
(a)
IFP 100X3 mA
DC Forward Current
(b)
IF 25X3 mA
Reverse Voltage VR 5 V
Electrostatic Discharge (HBM) ESD 1000 V
Operating Temperature Range Topr
-40℃ to +80℃
Storage Temperature Range Tstg
-40℃ to +85℃
Soldering Temperature Tsld
260℃ for 5 Seconds
Parameters Symbol Min. Typ. Max. Unit Test Condition
Luminous Intensity
(a)
IV 5800 6500 --- mcd IF=20mA×3=60mA
Luminous Flux
(a)
Φv 20 22 --- lm
IF=20mA×3=60mA
Viewing Angle
(b)
2θ1/2 --- 120 --- Deg
IF=20mA×3=60mA
Chromaticity Coordinates
(C)
x --- 0.28 ---
IF=20mA×3=60mA
y --- 0.29 ---
Color Temperature CCT 8000 10000 --- K IF=20mA×3=60mA
Color Rendering Index CRI 70 --- --- Ra IF=20mA×3=60mA
Forward Voltage VF 2.80 3.20 3.60 V IF=20mA×3=60mA
Reverse Current IR --- --- 10 µA V
R
=5V
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com