Datasheet

SMD LED
Electrical Optical Characteristics at Ta=25℃
Notes:
a. Derate linearly as shown in derating curve.
b. Duty Factor = 10%, Frequency = 1 kHz
Notes:
a. ALuminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response
curve.
b. 2θ1/2 is the o -axis angle where the luminous intensity is 1⁄2 the peak intensity
c. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which
defines the color of the device.
Absolute Maximum Ratings at Ta=25
℃
Pa
rameters Symbol Max Unit
Power Dissipation Pd 60 mW
Peak Forward Current
(a)
IFP 100 mA
DC Forward Current
(b)
IF 25 mA
Reverse Voltage VR 5 V
Electrostatic Discharge (HBM) ESD 2000 V
Operating Temperature Range Topr
-40℃ to +80℃
Storage Temperature Range Tstg
-40℃ to +85℃
Soldering Temperature Tsld
260℃ for 5 Seconds
Parameters Symbol Min. Typ. Max. Unit Test Condition
Luminous Intensity
(a)
IV 70 115 --- mcd IF=20mA
Viewing Angle
(b)
2θ1/2 --- 120 --- Deg IF=20mA
Peak Emission Wavelength λp --- 632 --- nm IF=20mA
Dominant Wavelength
(C)
λd --- 624 --- nm IF=20mA
Spectral Line Half-Width △λ --- 20 --- nm IF=20mA
Forward Voltage VF 1.60 2.00 2.40 V IF=20mA
Reverse Current IR --- --- 10 µA VR=5V
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com