User's Manual

Re-Calibration
In standard option, the DX6106 Optical Unit is delivered
with one calibration data. The calibration is made at
optimal operating temperature.
User can make re-calibration at any time. It is possible
to do this at other operating temperatures, with larger
set of reference gases (larger order polynomial) and to
replace stored data by the new one.
According to customer demands the re-calibration
could be done by Manufacturer on request.
On-board memory can contain itself additionally 13
data blocks for more calibrations. Totally up to 14
different calibrations could be done.
The polynomial coefficients depend on the design
of the Optical Unit’s optical scheme. It is not necessary
to make re-calibration often.
It is recommended to perform re-calibration annually.
A
j
REV. 1.10/2002
RMT LtdRMT Ltd
RMT LtdRMT Ltd
DX6106
5-4