SAFETY DATA SHEET Issuing Date December 1, 2016 Revision Date New Revision Number 1 1.
Revision Date: New RMR-86 Mold Stain & Mildew Stain Remover 2. HAZARDS IDENTIFICATION Classification This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200).
Revision Date: New RMR-86 Mold Stain & Mildew Stain Remover Unknown Toxicity Not applicable. Other information Very toxic to aquatic life with long lasting effects. Interactions with Other Chemicals Reacts with other household chemicals such deck cleaners, wood bleaches, wood restorers, rust removers, wood or masonry finishes, toilet bowl cleaners, acids or products containing ammonia to produce hazardous gases, such as chlorine and other chlorinated compounds. 3.
Revision Date: New RMR-86 Mold Stain & Mildew Stain Remover 5. FIRE-FIGHTING MEASURES Suitable Extinguishing Media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Unsuitable Extinguishing Media CAUTION: Use of water spray when fighting fire may be inefficient. Specific Hazards Arising from the Chemical This product causes burns to eyes, skin, and mucous membranes. Thermal decomposition can release sodium chlorate and irritating gases and vapors.
Revision Date: New RMR-86 Mold Stain & Mildew Stain Remover 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Exposure Guidelines Chemical Name Surfactants Trade Secret Sodium hypochlorite 7681-52-9 ACGIH TLV OSHA PEL NIOSH IDLH None None None None None None ACGIH TLV: American Conference of Governmental Industrial Hygienists - Threshold Limit Value. OSHA PEL: Occupational Safety and Health Administration - Permissible Exposure Limits.
Revision Date: New RMR-86 Mold Stain & Mildew Stain Remover 9.
Revision Date: New RMR-86 Mold Stain & Mildew Stain Remover 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Product Information . Inhalation Exposure to vapor or mist may irritate respiratory tract and cause coughing. Inhalation of high concentrations may cause pulmonary edema. E ye Contact Corrosive. May cause severe damage to eyes. Skin Contact May cause severe irritation to skin. Prolonged contact may cause burns to skin.
Revision Date: New RMR-86 Mold Stain & Mildew Stain Remover Numerical measures of toxicit y - Product Information The follow ing values are calculated based on chapter 3.1 of the GHS document ATEmix (oral) 40 g/kg ATEmix (inhalation-dust/mist) 29 mg/L 12. ECOLOGICAL INFORMATION Ecotoxicity Very toxic to aquatic life with long lasting effects. Persistence and Degradabilit y No information available. Bioaccumulation No information available. Other adverse effects No information available. 13.
Revision Date: New RMR-86 Mold Stain & Mildew Stain Remover IATA UN-No Proper Shipping Name Hazard Class Packing Group Description IMDG/IMO UN-No Proper Shipping Name Hazard Class Packing Group EmS No. Marine Pollutant Description UN3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. 9 III UN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (SODIUM HYPOCHLORITE), 9, III UN3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Revision Date: New RMR-86 Mold Stain & Mildew Stain Remover CERCLA This material, as supplied, contains one or more substances regulated as a hazardous substance under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) Chemical Name Hazardous Substances RQs Extremely Hazardous Substances RQs 100 lb - 1000 lb - Sodium hypochlorite 7681-52-9 Surfactants Trade Secret RQ RQ 100 lb final RQ RQ 45.
SAFETY DATA SHEET Date Prepared : 04/29/2015 SDS No : RMR-141 RTU 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: RMR-141 RTU GENERAL USE: Ready to Use Disinfectant Cleaner PRODUCT DESCRIPTION: Disinfectant & Cleaner PRODUCT CODE: CHEMICAL FAMILY: Quaternary ammonium chloride blend DISTRIBUTOR RMR Solutions, LLC 201 Appian Way Dr, Suite 202 Brighton MI, 48116-2478 Emergency Phone: 866-822-8744 Customer Service: 866-822-8744 E-Mail: info@rmrsolutions.com EPA REG. NO.: 61178-2 LL C ns , 2.
PHYSICAL APPEARANCE: Clear Liquid IMMEDIATE CONCERNS: Mild eye irritant. POTENTIAL HEALTH EFFECTS EYES: Contact may cause mild eye irritation. SKIN: May be mildly irritating with prolonged or repeated contact. SKIN ABSORPTION: No known significant effects or critical hazards. INGESTION: Although of moderate to low toxicity, ingestion of large amounts can cause gastrointestinal irritation, nausea, vomiting, diarrhea.
6. ACCIDENTAL RELEASE MEASURES SMALL SPILL: Avoid runoff into storm sewers and ditches which lead to waterways. LARGE SPILL: Avoid walking in material. Prevent product from entering into stream, soil, storm sewer or other bodies of water. ENVIRONMENTAL PRECAUTIONS WATER SPILL: Avoid discharges into open waterways. LAND SPILL: Avoid discharge to soil. AIR SPILL: NA = Not Applicable GENERAL PROCEDURES: Isolate spill or leak area immediately. Keep unauthorized personnel away.
EVAPORATION RATE: (Water =1) 1.0 DENSITY: 8.33 at 20°C (68°F) SPECIFIC GRAVITY: 1 grams/ml. at 20°C (68°F) VISCOSITY: Water thin. (VOC): None 10. STABILITY AND REACTIVITY REACTIVITY: Stable HAZARDOUS POLYMERIZATION: Will not occur. CONDITIONS TO AVOID: None Expected. HAZARDOUS DECOMPOSITION PRODUCTS: None Expected. INCOMPATIBLE MATERIALS: Strong oxidizers 11.
PRODUCT DISPOSAL: Small quantities (less than 1 gallon) of used material may be flushed to sanitary sewer with copious amounts of water. Larger quantities must be disposed of by a licensed disposal company. EMPTY CONTAINER: Triple rinse container promptly after emptying. Fill container 1/4 full with water and recap. Shake for 10 seconds. Drain and repeat. Offer for recycling if available or puncture and dispose in a sanitary landfill, or by other procedures approved by state and local authorities. 14.
