User Manual

78
User's Guide Fireface UFX II © RME
Operational Mode. Defines TotalMix FX basic operational mode. Choices are Full Mode (de-
fault, mixer active, all routing options available), and Digital Audio Workstation Mode (straight
playback routing, no input mix). See chapter 29 for details.
Store Current state into device. The unit can store up to 6 setups (the current state) in its own
memory. This function is especially useful when working in stand-alone mode.
25.11 Menu Window
Zoom Options 100%, 135%, 200%. Depending on the size of the monitor and the current reso-
lution TotalMix FX might be much too small and the controls too tiny to easily operate them.
Together with the 2 Row mode these options give a lot of different window sizes that suit all
monitors and resolutions currently existing.
Hide Control Strip. Shifts the Control Strip out of the visible area to gain more space for other
elements.
26. The Matrix
26.1 Overview
The mixer window of TotalMix looks and operates similar to mixing desks, as it is based on a
conventional stereo design. The matrix display presents a different method of assigning and
routing channels, based on a single channel or monaural design. The matrix view of the Fire-
face UFX II has the look and works like a conventional patchbay, adding functionality way be-
yond comparable hardware and software solutions. While most patchbays will allow you to con-
nect inputs to outputs with just the original level (1:1, or 0 dB, as known from mechanical
patchbays), TotalMix allows you to use a freely definable gain value per crosspoint.
Matrix and TotalMix are different ways of displaying the same processes. Because of this both
views are always fully synchronized. Each change in one view is immediately reflected in the
other view as well.
26.2 Elements of the Matrix View
The visual design of the TotalMix Matrix is mainly determined by the architecture of the Fireface
UFX II system:
¾ Horizontal labels. All hardware outputs
¾ Vertical labels. All hardware inputs. Below are all playback channels.
¾ Green 0.0 dB field. Standard 1:1 routing
¾ Dark grey field with number. Shows the
current gain value as dB
¾ Blue field. This routing is muted
¾ Red field. Phase 180° (inverted)
¾ Dark grey field. No routing.
To maintain overview when the window size has been reduced, the labels are floating. They
won't leave the visible area when scrolling.