User Manual

User's Guide Fireface 800 © RME

DA, Line Out 1-8, rear

• Resolution: 24 bit

• Dynamic range (DR): 116 dB, 119 dBA @ 44.1 kHz (unmuted)

• Frequency response @ 44,1 kHz, -0,1 dB: 1 Hz – 21.1 kHz

• Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 43.5 kHz

• Frequency response @ 192 kHz, -1 dB: 1 Hz - 70 kHz

• THD: -103 dB, < 0.0007 %

• THD+N: -100 dB, < 0.0001 %

• Channel separation: > 110 dB

• Maximum output level: +19 dBu

• Output: 6.3 mm TRS jack, servo-balanced

• Output impedance: 75 Ohm

• Output level switchable Hi Gain, +4 dBu, -10 dBV

• Output level at 0 dBFS @ Hi Gain: +19 dBu

• Output level at 0 dBFS @ +4 dBu: +13 dBu

• Output level at 0 dBFS @ -10 dBV: +2 dBV

DA - Stereo Monitor Output (Phones)

• as DA, but:

• Output: 6.3 mm TRS jack, unbalanced (stereo)

• Maximum output level at 0 dBFS: +17 dBu

• Output impedance: 30 Ohm

29.2 Digital

• Clocks: Internal, ADAT In, SPDIF In

• Low Jitter Design: < 1 ns in PLL mode, all inputs

• Internal clock: 800 ps Jitter, Random Spread Spectrum

• Jitter suppression of external clocks: about 30 dB (2.4 kHz)

• Effective clock jitter influence on AD and DA conversion: near zero

• PLL ensures zero dropout, even at more than 100 ns jitter

• Digital Bitclock PLL for trouble-free varispeed ADAT operation

• Internal sample rates: 32 / 44.1 / 48 / 64 / 88.2 / 96 / 128 / 176.4 / 192 kHz