User Manual

User's Guide Digiface Dante © RME

11. DIGICheck Windows

The DIGICheck software is a unique utility developed for testing, measuring and analysing

digital audio streams. Although this Windows software is fairly self-explanatory, it still includes a

comprehensive online help. DIGICheck 5.92 operates as multi-client ASIO host, therefore can

be used in parallel to any software, with both inputs and outputs (!). The following is a short

summary of the currently available functions:

x Level Meter. High precision 24-bit resolution, 2/8/128 channels. Application examples: Peak

level measurement, RMS level measurement, over-detection, phase correlation

measurement, dynamic range and signal-to-noise ratios, RMS to peak difference (loudness),

long term peak measurement, input check. Oversampling mode for levels higher than 0

dBFS. Vertical and horizontal mode. Slow RMS and RLB weighting filter. Supports

visualization according to the K-System.

x Hardware Level Meter for Input, Playback and Output. Reference Level Meter freely

configurable, causing near zero CPU load, because calculated from the Digiface hardware.

x Vector Audio Scope. World wide unique Goniometer showing the typical afterglow of a

oscilloscope-tube. Includes Correlation meter and level meter.

x Spectral Analyser. World wide unique 10-, 20- or 30-band display in analog bandpass filter

technology. 192 kHz-capable!

x Totalyser. Spectral Analyser, Level Meter and Vector Audio Scope in a single window.

x Surround Audio Scope. Professional Surround Level Meter with extended correlation

analysis, ITU weighting and ITU summing meter.

x ITU1770/EBU R128 Meter. For standardized loudness measurements.

x Bit Statistics & Noise. Shows the true resolution of audio signals as well as errors and DC

offset. Includes Signal to Noise measurement in dB and dBA, plus DC measurement.

x Channel Status Display. Detailed analysis and display of Channel Status data within the

MADI stream.

x Global Record. Long-term recording of all channels at lowest system load.

x Completely multi-client. Open as many measurement windows as you like, on any

channels and inputs or outputs!

To install DIGICheck, go to the \DIGICheck directory on the RME Driver CD and run setup.exe.

Follow the instructions prompted on the screen.

DIGICheck is constantly updated. The latest version is always available on our website