User Manual

38
User's Guide Digiface AVB © RME
13.6 Preferences
The dialog Preferences can be opened via the Options menu or directly via F2.
Level Meters
¾ Full scale samples for OVR.
Number of consecutive samples to
trigger an over detection (1 to 10).
¾ Peak Hold Time. Hold time of the
peak value. Adjustable from 0.1 up to
9.9 s.
¾ RMS +3 dB. Shifts the RMS value by
+3 dB, so that full scale level is
identical for Peak and RMS at 0
dBFS.
Mixer Views
¾ FX Send follows highest Submix.
¾ FX Send follows Main Out. Not
available for the Digiface AVB - no
FX.
¾ Center Balance/Pan when
changing Mono/Stereo. When
switching a stereo channel into two
mono channels the pan-pots are set
fully left and right. This option will set
them to center instead.
¾ Disable double click fader action.
Prevents unintentional gain settings,
for example when using sensitive
touchpads.
Dynamic Meters
Not available for the Digiface AVB.
Snapshots
¾ Do not load Main volume/balance.
The values stored in the Snapshot
are not loaded for the Main Out and
all groups of output faders joined by
Main, so the current setting for all
these is not changed.
Device Handling
¾ Always init DSP devices with
TotalMix FX settings. For the
Digiface AVB: always on, as the unit
does not store any. When connecting
to a computer TotalMix FX will
immediately load its settings into the Digiface AVB.
¾ Count MADI Channels per port. Not available for the Digiface AVB.
¾ Disable ASIO Direct Monitoring. Disables ASIO Direct Monitoring (ADM) for the Digiface
AVB within TotalMix FX.