Manualshelf

User Manual

ManualsBrandsRME ManualsMusical InstrumentsDigiface AVB - AVB / TSN 256 CHANNEL AUDIO INTERFACE FOR AUDIO STREAMING ON NETWORK
31323334353637383940
36
User's Guide Digiface AVB © RME
13.5.3 Channel Layout - Layout Presets
To maintain overview within TotalMix FX channels can be hidden. Channels can also be ex-
cluded from being remoted. Under Options / Channel Layout a dialog lists all I/Os with their
current state. Selecting one or several channels enables the options to the right:
¾ Hide Channel in Mixer/Matrix. The selected channels are no longer shown in TotalMix FX,
nor are they available via MIDI or OSC remote control.
¾ Hide Channel in MIDI Remote 1-4. The selected channels are hidden for MIDI remote (CC
and Mackie Protocol).
¾ Hide Channel in OSC Remote 1-4. The selected channels are hidden for OSC remote
control.
Hidden channels in Mixer/Matrix are still fully functional. An existing routing/mixing/FX process-
ing stays active. But as the channel is no longer visible it can not be edited anymore. At the
same time the hidden channels are removed from the list of remote controllable channels, to
prevent them from being edited unnoticed.
Hidden channels in MIDI Remote x are removed from the list of remote controllable channels.
Within an 8-channel block of a Mackie compatible control they are skipped. The control there-
fore is no longer bound to consecutive orders. For example it will control channels 1, 2, and 5 to
10, when channels 3 and 4 are hidden.
The same can be done for OSC. With unnecessary channels made invisible for the OSC re-
mote the more important channels are available as one block on the remote.
The dialog can be called directly from TotalMix by a right mouse click on any channel. The cor-
responding channel will then be preselected in the dialog.
In the above example channels 23/24 have been made invisible. When they are not used this is
an easy way to remove them from the mixer completely.
Rows Inputs, Playbacks and Outputs are set up individually by the tabs at the top. A double
click onto any line opens the edit field for the Name (User) column. Editing channel names in
this dialog is quick, Enter jumps to the next line. The names of the channels in the Control
Room section can only be changed this way.