User Manual

User's Guide Babyface Pro FS © RME

x Output: 3.5 mm TRS jack, unbalanced

x Output impedance: 0.1 Ohm

x Output level at 0 dBFS, 1 kOhm load: +7 dBu

x Max power @ 0.1% THD: 90 mW

x Signal to Noise ratio (SNR): 114 dB RMS unweighted, 117 dBA

x Noise level: -107 dBu

27.2 MIDI

x 1 x MIDI I/O via breakout cable with 2 x 5-pin DIN jacks

x Galvanically isolated by optocoupled input

x Hi-speed mode: Jitter and response time typically below 1 ms

x Separate 128 byte FIFOs for input and output

27.3 Digital

x Clocks: Internal, ADAT In, SPDIF In

x Jitter suppression of external clocks: > 50 dB (2.4 kHz)

x Effective clock jitter influence on AD and DA conversion: near zero

x PLL ensures zero dropout, even at more than 100 ns jitter

x Digital Bitclock PLL for trouble-free varispeed ADAT operation

x Supported sample rates: 28 kHz up to 200 kHz

27.4 Digital Inputs

ADAT Optical

x 1 x TOSLINK

x Standard: 8 channels 24 bit, up to 48 kHz

x Double Speed (S/MUX): 4 channels 24 bit 96 kHz

x Quad Speed (S/MUX4) : 2 channels 24 bit 192 kHz

x Bitclock PLL ensures perfect synchronisation even in varispeed operation

x Lock Range: 31.5 kHz – 50 kHz

x Jitter suppression: > 50 dB (2.4 kHz)

SPDIF optical

x 1 x optical, according to IEC 60958

x Accepts Consumer and Professional format

x Lock Range: 27 kHz – 200 kHz

x Jitter suppression: > 50 dB (2.4 kHz)

27.5 Digital Outputs

ADAT optical