User Manual

User's Guide Babyface Pro FS © RME
59
21.8 Settings
The dialog Settings can be opened via the Options menu or directly via F3.
21.8.1 Mixer Page
On the mixer page some typical settings for the mixer operation are set, like Talkback source,
Dim amount when Talkback is active, the stored main volume or the input used for the External
Input function.
Talkback
¾ Input. Selects the input channel of the
Talkback signal (microphone in control
room). Default: None.
¾ Dim. Amount of attenuation of the
signals routed to the Phones in dB.
Listenback
¾ Input. Selects the input channel of the
Listenback signal (microphone in
recording room). Default: None.
¾ Dim. Amount of attenuation of the
signals routed to the Main Out in dB.
Main Out
¾ Recall. User defined listening volume,
activated by the Recall button at the
unit or in TotalMix.
¾ Dim. Amount of attenuation for the
Main Out in dB.
¾ External Input. Selects the stereo
input that replaces the mix signal on the
Main Out when activated. The volume
of the stereo signal is adjusted by the
slider Gain.
Solo/PFL Mode
¾ Live Mode, PFL replaces Solo. PFL
means Pre Fader Listening. This
feature is very useful when operating
TotalMix in a live environment, as it allows to quickly listen/monitor any of the inputs by hit-
ting the Solo button. Monitoring happens on the output set for the Cue signal via the Assign
dialog.
¾ Exclusive Solo/PFL Mode. Only a single Solo or PFL can be active at a time. Activating a
different one automatically deactivates the previous one.
¾ 2-Row Mode with only Input in first row. The Software Playback channels are shifted to
the lower row, beside the Hardware Outputs.