User Manual

User's Guide Babyface Pro FS © RME
57
21.7 Preferences
The dialog Preferences can be opened via the Options menu or directly via F2.
Level Meters
¾ Full scale samples for OVR. Number
of consecutive samples to trigger an
over detection (1 to 10).
¾ Peak Hold Time. Hold time of the peak
value. Adjustable from 0.1 up to 9.9 s.
¾ RMS +3 dB. Shifts the RMS value by
+3 dB, so that full scale level is
identical for Peak and RMS at 0 dBFS.
Mixer Views
¾ FX Send follows highest Submix.
Locks the FX Send knob to the channel
fader. As TotalMix supports multiple
routings per channel, a definition is
needed which fader (only one is visible)
is the one that FX Send will follow. This
is always the one with the highest fader
position, means the highest gain.
¾ FX Send follows Main Out mix. Locks
the FX Send knob to the channel fader
only for the Main Out submix. This is a
typical Live feature, where the FX Send
is always tied to the fader for the most
important output - the Main Out. When
adjusting other submixes the FX send
will not follow the fader movement.
¾ Center Balance/Pan when changing
Mono/Stereo. When switching a stereo
channel into two mono channels the
pan-pots are set fully left and right. This
option will set them to center instead.
¾ Disable double click fader action.
Prevents unintentional gain settings, for
example when using sensitive touch-
pads.
¾ Store channel open/close in Layout
Preset. Also loads the state of the
channel panels (Setting/EQ/Dyn).
Dynamic Meters
Not valid for the Babyface Pro.
Snapshots
¾ Do not load - Main Volume, Main/Phones Volumes, Control Room Settings. The se-
lected values stored in the Snapshot are not loaded, so the current setting is not changed.
Device Handling
Always init… and Count MADI… are not valid for the Babyface Pro.
¾ Disable ASIO Direct Monitoring. Disables ASIO Direct Monitoring (ADM) for the Babyface
Pro within TotalMix FX.