User Manual

User's Guide Babyface Pro FS © RME
31
15.2 De-installing the Drivers
In case of problems the driver files can be deleted manually by dragging them to the trash bin:
/Applications/Fireface USB Settings
/Applications/Totalmix
/System/Library/Extensions/FirefaceUSB.kext
/Users/username/Library/Preferences/de.rme-audio.TotalmixFX.plist
/Users/username/Library/Preferences/de.rme-audio.Fireface_USB_Settings.plist
/Library/LaunchAgents/de.rme-audio.firefaceUSBAgent.plist
Under the latest Mac OS the User/Library folder is not visible in the Finder. To unhide it start
Finder, click on the menu item Go. Hold down the option (alt) key, then click on Library.
15.3 Firmware Update
The Flash Update Tool updates the firmware of the Babyface Pro to the latest version. It re-
quires an already installed driver. Please download the FUT from the RME website at
http://rme.to/usbe
.
Unzip the downloaded file and start the firmware update with Fireface USB Flash. The Flash
Update Tool displays the current revision of the Babyface Pro firmware and whether it needs an
update or not. If so, simply press the 'Update' button. A progress bar will indicate when the flash
process is finished (Verify Ok).
After the update the unit needs to be reset. This is done by powering down the Babyface Pro for
5 seconds. A reboot of the computer is not necessary.
When the update fails (status: failure), the unit's second BIOS will be used from the next cold
boot on (Secure BIOS Technology). Therefore the unit stays fully functional. The flash process
should then be tried again on a different computer.