User Manual

User’s Guide OctaMic XTC © RME

XLR sockets analog input 1 - 8

The XLR connectors of the analog inputs are wired according to international standards:

1 = GND (shield)

2 = + (hot)

3 = - (cold)

TRS jacks analog input 1 - 4

The stereo ¼" TRS jacks of the analog inputs are wired according to international standards:

Tip = + (hot)

Ring = – (cold)

Sleeve = GND

TS jacks analog input 5 - 8

Inputs 5 to 8 are unbalanced:

Tip = + (hot)

Ring = n.c. (not connected)

Sleeve = GND

TRS Phones jack

The analog monitor outputs on

the front are accessible

through stereo 1/4" TRS jacks.

This allows a direct connection

of headphones. In case the

output should operate as Line

output, an adapter TRS plug to

RCA phono plugs, or TRS plug

to TS plugs is required.

The pin assignment follows

international standards. The

left channel is connected to the

tip, the right channel to the ring

of the TRS jack/plug.