User Manual

User’s Guide OctaMic XTC © RME
59
26.6 General
• Power supply: Internal switching PSU, 100 - 240 V AC, 30 Watts
• Typical power consumption: 14 Watts
• Maximum power consumption: < 20 Watts
• Dimensions including rack ears (WxHxD): 483 x 44 x 242 mm (19" x 1.73" x 9.5")
• Dimensions without rack ears/handles (WxHxD): 436 x 44 x 235 mm (17.2" x 1.73" x 9.3")
• Weight: 3 kg ( 6.6 lbs)
• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
• Relative humidity: < 75%, non condensing
26.7 Firmware
The OctaMic XTC is internally based on programmable logic. By re-programming of a little com-
ponent called Flash-PROM, both function and behaviour of the unit can be changed at any time.
At the time of writing this manual, the unit is shipped with firmware 47. The firmware version is
displayed after power on for about one second on the display, and listed in the menu SETUP –
Options – General Settings – SW-Version.
Firmware Updates: If available then they are found on the RME website (www.rme-audio.de
) in
the section Downloads, free of charge. See chapter 16 and 20 for more details.
26.8 MADI User Bit Chart
• RS-232: channels 1 to 9 (internal through mode always active)
• ADC: channel 19
• MIDI: channel 56 (48k) / 28 (96k)