User Manual

User’s Guide OctaMic XTC © RME
47
21.6 General
• Power supply: Internal switching PSU, 100 - 240 V AC, 30 Watts
• Typical power consumption: 14 Watts
• Maximum power consumption: < 20 Watts
• Dimensions including rack ears (WxHxD): 483 x 88 x 242 mm (19" x 3.46" x 9.5")
• Dimensions without rack ears/handles (WxHxD): 436 x 88 x 235 mm (17.2" x 3.46" x 9.3")
• Weight: 3 kg ( 6.6 lbs)
• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
• Relative humidity: < 75%, non condensing
21.7 Firmware
The OctaMic XTC is internally based on programmable logic. By re-programming of a little com-
ponent called Flash-PROM, both function and behaviour of the unit can be changed at any time.
At the time of writing this manual, the unit is shipped with firmware 21/35. The firmware version
is displayed after power on for about one second on the display, and listed in the menu SETUP
– Options – General Settings – SW-Version.
Firmware Updates: If available then they are found on the RME website (www.rme-audio.de
) in
the section Downloads, free of charge. See chapter 16 for more details.
21.8 MADI User Bit Chart
• RS-232: channels 1 to 9 (internal through mode always active)
• ADC: channel 19
• MIDI: channel 56 (48k) / 28 (96k)