User Manual

User’s Guide MADI Router © RME !5
4. Firmware
The MADI Router’s core has been created using programmable logic and is user updateable.
This is achieved by simply saving a firmware update file to a USB stick, attaching the USB
stick directly to the MADI Router’s USB port and then running the firmware update from the
SETUP menu. Please see chapter 7.5.6 for detailed information.
At the time of writing this manual, the unit is shipped with firmware 1.29. The firmware version
is displayed on the TFT display after powering the unit on.
When updates become available, they are published on http://www.rme-audio.com in the
download section.
Version 1.28: first release
Version 1.29: added transparency settings (see chapter 7.5.3)
Version 1.33b: compatibility improvements
Known issues:
In the current MADI TP implementation, the usable bandwidth of the four ports is reduced to
either 56/28/14 audio channels at 48/96/192 kHz sampling frequency, or 64/32/16 audio
channels at 44.1/88.2/176.4 kHz sampling frequency. Signals that exceed these limits are not
detected.