User Manual

User’s Guide MADI Router © RME !26
7.5 SETUP Menu
The setup menu gives access to the individual clock settings for each matrix, the wordclock
output settings and also allows the user to update the firmware of the device. It can be
accessed by pressing the [SETUP] button while the unit displays its IDLE screen.
7.5.1 Matrix Clocking
The Matrix Clocking section of the setup menu is used to set the correct reference clock and
sample rate settings for each of the four internal matrices and to create one additional default
setting.
Note: This menu can also be quickly accessed by pressing and holding the [SETUP] button
while editing a matrix in the routing section.
Rotating the [OUT] encoder while in the matrix clocking section changes the matrix you are
addressing. The currently addressed matrix is indicated as MX.1, MX.2, MX.3 and MX.4 in the
lower portion of the display.
One additional screen, DEF, allows the user to define default settings that can be accessed
across all matrices.
Rotating the [IN] encoder highlights one of the following settings, which can then be changed
with the same encoder after pushing it once. Pushing the [OUT] encoder leads back to the
item selection.
!