User Manual

User’s Guide MADI Router © RME !24
This feature toggles the type of patch from consecutive input channels to ‘one to many’,
in the routing indicator shown as a thin line. In case the patch had been deleted,
[GANG] + push [INPUT] creates a new patch.
[GANG] + rotate encoder counter-clockwise
Rotating either encoder counter-clockwise while pushing the [GANG] button deletes
the patches. Note that there always has to be a patch to output channel one since the
matrix uses it as a clock reference when in Auto-Sync mode.
[SETUP] Button
When a matrix is displayed, the [SETUP] button allows the user to quickly verify and
change the clock settings of the matrix.
[ROUTE] Button
While holding the [ROUTE] button, press and hold the [IN] encoder in order to change
the size of the output cursor from eight channels to 1, 2, or 4 channels.
!