User Manual

User’s Guide MADI Router © RME !15
To delete a routing, rotate the input encoder counter-clockwise until the cursor disappears to
the left of the "A Optical" input icon, or rotate the [IN] encoder counter-clockwise while pressing
the [GANG] button.
To copy a routing to the next port on the right of the currently selected output port, press and
hold the [GANG] button while turning the [OUT] encoder clockwise.
Pushing the [IN] encoder while holding down the [GANG] button toggles the source for the
currently selected port between the corresponding input port (loopback), matrix 1 and no patch.
!