User Manual

User’s Guide MADI Router © RME !12
7.2 Detailed Input Status
While in the status display, rotating or pushing the [IN] encoder immediately activates the
'Inspect Input' screen. This page shows the detailed status of an input port selected by turning
the [IN] encoder. Information about all other ports including routing is hidden in order to allow
a dedicated focus on the selected input port. Pressing either encoder exits the detailed view
and returns to the main status display.
In this detailed view of the input status, the following information is displayed for each physical
MADI input port:
● Lock | Invalid | No signal
Lock: a MADI signal is detected and has been present for a minimum of 1
second.
Invalid signal: a signal is detected but it violates MADI (AES10) definitions
No signal: no signal is detected for more than one second.
● Rate: 32 kHz – 192 kHz
Shows the sampling rate of the MADI input:
● 32kHz, 44.1kHz, 48kHz in 48k frame mode
● 88.2kHz, 96kHz in 96k frame mode
● 176.4kHz, 192kHz in a non-standard 192k frame (experimental)
!