User Manual

42
User’s Guide M-32 AD © RME
19. MIDI Implementation M-Series
19.1 Basic SysEx Format
Value
Name
F0h SysEx header
00h 20h 0Dh MIDITEMP manufacturer ID
32h Model ID (M-Series)
00h..7Eh, 7Fh Bank number / device ID (7Fh = broadcast, all IDs)
mm Message type
nn Parameter number (see table 1)
oo Data byte
F7h EOX
Bank Number / Device ID
The lower nibble refers to the device ID (0..7), the higher nibble refers to the bank number
(0..7), e. g. 25h means bank 2, device 5. 7Fh addresses all banks and all devices.
19.2 Message Types
Value Name
10h Request value
20h Set value
30h Value response
Request Value
Format: F0 00 20 0D 32 (bank no. / dev ID) 10 F7
This string triggers a complete dump of all value response data bytes including the level meter
data.
Set Value
Sets any number of parameters.
nn / oo can be repeated freely.
Value Response
After being triggered by receiving a request value command, device sends a string of all value
response data bytes. Message type is set to 30h.