User Manual

User's Guide Fireface UFX+ © RME

Record View. Switches from Mixer View to Record View. In Record View Mute

and Solo buttons in first and third row are replaced by Play and Record (Arm)

buttons.

A click on the Playback button opens a dialog to assign channels. A flashing

playback button indicates playback channels have been selected that are not found

in the played back file. A playback is not only possible at the outputs but also at the

mixer input. This way, signals can also be processed with Echo/Reverb and mixed

with any other signal to any output

Note

: The level meters only show the DURec playback signal when in Post FX

mode.

The Record buttons behave in a similar way to other buttons in TotalMix: Activa-

tion/deactivation of all channels to the right by Ctrl + mouse click, flashing buttons

when the maximum number of channels has been exceeded after changing the

sample rate. When loading a different workspace during ongoing recording and

playback, the configuration of record and playback is not updated or changed.

The display of the Fireface UFX+ brings up the Record/Playback menu automatically when a

storage medium is connected and recognized, or after pushing the REC/PLAY button.

File. Name of the currently selected file.

Status. This line changes its content depending on the current

operation: information on the selected file, the ongoing or just

completed recording: xx channels selected (number of channels

armed for recording), SR xx kHz (sample rate), USB xx%, x Err

(USB Load and number of errors).

Time. Length of the recording or current playback position.

When selecting the record button at the unit the medium’s

remaining total record time is shown. Due to the limitation of 100

files the actual recording time may be shorter. In Stop and

Playback mode turning encoder 2 allows to change the current playback position.

Transport Bar. Turning encoder 2 moves the cursor over Del (Delete), Record, Play/Pause and

Stop. The selected function is initiated by pressing encoder 2. During playback the buttons Del /

Record will change to Previous File / Next File.

Turning encoder 1 brings up the Rec/Play Settings with subpages USB Media, Record, Play-

back and Time & Date.

USB Media.

DURec/Partition. The Direct USB Recording function can be

switched off completely. This reduces the DSP load a bit, which

then raises the number of possible effects in TotalMix FX. Turn

encoder 2 to select Off. Default is1, which means both DURec

enabled and the first partition found on the USB media will be

used. On some media it will be necessary to use partition 2 or up.

Capacity. Storage size of the media.

Free. Free space on the media.