User Manual

User's Guide Fireface UFX II © RME

14. Configuring the Fireface UFX II

14.1 Settings Dialog

Configuring the Fireface is done via its own settings dialog. Start the program Fireface USB

Settings. The mixer of the Fireface UFX II (TotalMix FX) can be configured by starting the pro-

gram Totalmix.

The Fireface’s hardware offers a number of helpful, well thought-out practical functions and

options which affect how the card operates - it can be configured to suit many different require-

ments. The following is available in the 'Settings' dialog:

• Operation of the DSP

• Configuration of digital I/Os

• Current sample rate

• Synchronization behaviour

• State of input and output

Any changes performed in the

Settings dialog are applied

immediately - confirmation (e.g. by

exiting the dialog) is not required.

However, settings should not be

changed during playback or

record if it can be avoided, as this

can cause unwanted noises.

Use the drop down menu

Properties For to select the unit

to be configured.

On the right of it the current

firmware and driver version is

shown.

Input Options

Word Clock - Termination

Checking this option terminates

the word clock input internally with

75 Ohms.

Optical 2 In

SPDIF will turn the optical input into an optical SPDIF input, ADAT into an ADAT input (default).

Please note that using the optical input with SPDIF disables the AES input via XLR.

DSP – Record EQ+D

Switches EQ and Dynamics of all input channels into the recording path. In case Loopback has

been activated the EQ and Dynamics of the Output channel are within the recording path. See

also chapter 27.6.