User Manual

16
User's Guide Fireface UFX II © RME
Buffer Size
The setting Buffer Size determines the latency between incoming and outgoing ASIO and WDM
data, as well as affecting system stability (see chapter 9.1).
USB Diagnosis indicates USB transmission errors. The display will be reset on any start of a
playback/record. More information can be found in chapter 39.3.
Input Options
Word Clock In Termination
Checking this option terminates the word clock input internally with 75 Ohms.
Optical 2 In
Operates as second ADAT input (default). Selecting AES/SPDIF will route the optical input sig-
nal to the AES-Receiver. This mode disables the AES input via XLR.
EQ+D for Record
Switches EQ and Dynamics of all input channels into the recording path. In case Loopback has
been activated the EQ and Dynamics of the Output channel are within the recording path. See
also chapter 27.6.
TMS activates the transmission of Channel Status data and Track Marker information on AES
and SPDIF inputs. In case these information are not required the feature should be turned off.
Output Options
AES Format
The AES output signal can have the Channel Status Professional or Consumer (SPDIF). This
setting is also valid when ADAT2 has been set as AES/SPDIF output. For further details please
refer to chapter 21.2.
Optical 2 Out
This optical TOSLINK output can operate as ADAT or AES/SPDIF output.
WDM Devices
Allows to freely set which I/Os are available as WDM devices, if these are stereo or multi-
channel devices (up to 8 channels), and if one or multiple of the currently active WDM devices
should have the Speaker property. More details are found in chapter 7.2.