User Manual
74
User's Guide Fireface UC © RME
Unfortunately, very often it is not possible within the record software to assign a different input
channel to an existing track 'on the fly'. The loopback mode solves this problem elegantly. The
routing scheme stays the same, with the input channel 1 sent to any output via TotalMix, to the
Compressor, from the Compressor back to any input. Now this input signal is routed directly to
output 1, and output 1 is then switched into loopback mode via Ctrl-mouse.
As explained in chapter 31.5, the hardware input of channel 1 now no longer feeds the record
software, but is still connected to TotalMix (and thus to the Compressor). The record software
receives the signal of submix channel 1 instead – the Compressor's return path.
31.7 MS Processing
The mid/side principle is a special positioning technique for microphones, which results in a mid
signal on one channel and a side signal on the other channel. These information can be trans-
formed back into a stereo signal quite easily. The process sends the monaural mid channel to
left and right, the side channel too, but phase inverted (180°) to the right channel. For a better
understanding: the mid channel represents the function L+R, while the side channel represents
L-R.
During record the monitoring needs to be
done in 'conventional' stereo. As TotalMix
can invert the phase, it also offers the
functionality of a M/S-decoder. The menu
Options includes a macro to simplify the
setup. First select the two input channels,
in the picture to the right Analog In 3 and
4, having the current routing destination
Analog Out 1+2. Now the string MS
Processing In 3+4 to AN 1+2 On is
shown in Options.
After a mouse click TotalMix sets gains and pans correctly. Of course
these settings can also be performed manually. Repeat the last step
to remove all routings (menu Options ...Off).
The M/S-Processing automatically operates as M/S encoder or decoder, depending on the
source signal format. When processing a usual stereo signal, all monaural information will be
shifted into the left channel, all stereo information into the right channel. Thus the stereo signal
is M/S encoded. This yields some interesting insights into the mono/stereo contents of modern
music productions. Additionally some very interesting methods of manipulating the stereo base
and generating stereo effects come up, as it is then very easy to process the side channel with
Low Cut, Expander, Compressor or Delay. The most basic application is already available di-
rectly in TotalMix: Changing the level of the side channel allows to manipulate the stereo width
from mono to stereo up to extended, stepless and in real-time.