User Manual
62
User's Guide Fireface UC © RME
29.7 The Quick Access Panel
This section includes additional options, further improving the handling of TotalMix. The Master
buttons for Mute and Solo have already been described, they allow for group-based working
with these functions.
In the View section the single mixer rows can be made visible or invisible. If the inputs are not
needed for a pristine playback mix, the whole upper vanishes after a click on the Input button. If
the hardware outputs are of no interest either, the window can thus be reduced to the playback
channels to save space. All combinations are possible and allowed.
As described earlier, Submix sets all routing windows to the same selection. Deactivating
Submix automatically recalls the previous view. The mixer can be made smaller horizontally
and vertically. This way TotalMix can be made substantially smaller and space-saving on the
desktop/screen, if you have to monitor or set up only a few channels or level meters.
The Presets are one of the mightiest and most useful features of TotalMix.
Behind the eight buttons, eight files are hidden (see next chapter). These
contain the complete mixer state. All faders and other settings follow the
changing of preset(s) in real-time, just by a single mouse click. The Save
button allows for storing the present settings in any preset. You can change
back and forth between a signal distribution, complete input monitoring, a
stereo and mono mix, and various submixes without any problem.
If any parameter is being altered after loading a preset (e. g. moving a fader),
the preset display flashes in order to announce that something has been
changed, still showing which state the present mix is based on.
If no preset button is lit, another preset had been loaded via the File menu,
Open file. Mixer settings can of course be saved the usual way, and can also
have long file names.
Instead of single presets a complete bank of (8) presets can be loaded at once.
Advantage: The names defined for the preset buttons will be stored and loaded
automatically.
Up to three Firefaces can be used simultaneously. The Unit buttons switch between the de-
vices. Holding down Ctrl while clicking on button Unit 2 or Unit 3 will open another TotalMix
window.
29.8 Presets
TotalMix includes eight factory presets, stored within the program. The user presets can be
changed at any time, because TotalMix stores and reads the changed presets from the files
preset11.umx to preset81.umx, located in Windows' hidden directory Documents and Set-
tings, <Username>, Local Settings, Application Data, RME TotalMix. On the Mac the location is
in the folder User, <Username>, Library / Preferences / Fireface. The first number indicates the
current preset, the second number the current unit.
This method offers two major advantages:
• Presets modified by the user will not be overwritten when reinstalling or updating the driver
• The factory presets remain unchanged, and can be reloaded any time.