User Manual

User's Guide Fireface 802 © RME

34. Technical Specifications

34.1 Analog

AD, Line In 1-8, rear

• Resolution AD: 24 bit

• Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA

• Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.8 kHz

• Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45.8 kHz

• Frequency response @ 192 kHz, -1 dB: 5 Hz – 92 kHz

• THD: < -110 dB, < 0.00032 %

• THD+N: < -104 dB, < 0.00063 %

• Channel separation: > 110 dB

• Maximum input level: +19 dBu

• Input: 6.3 mm TRS jack, electronically balanced

• Input impedance: 8 kOhm unbalanced, 12 kOhm balanced

• Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV

• Input level for 0 dBFS @ Lo Gain: +19 dBu

• Input level for 0 dBFS @ +4 dBu: +13 dBu

• Input level for 0 dBFS @ -10 dBV: +2 dBV (8.5 dB Gain @ +4 dBu)

Microphone In 9-12, front

As AD, but:

• Input: XLR, electronically balanced

• Input impedance: 3.4 kOhm

• Signal to Noise ratio (SNR): 112 dB RMS unweighted, 116 dBA

• Gain range: 54 dB

• Maximum input level, Gain +6 dB: +10 dBu

• Maximum input level, Gain +60 dB: -44 dBu

• CLIP LED: 0 dBFS

• SIG LED: -60 dBFS

Instrument In 9-12, front

As AD, but:

• Input: 6.3 mm TS jack, unbalanced

• Input impedance: 800 kOhm

• Signal to Noise ratio (SNR): 112 dB RMS unweighted, 115 dBA

• Maximum input level, Gain +6 dB: +21 dBu

• Maximum input level, Gain +60 dB: -33 dBu

• Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 20.8 kHz

• Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 35 kHz

• Frequency response @ 192 kHz, -1 dB: 5 Hz – 55 kHz