User Manual

User's Guide Fireface 802 © RME
97
DA, Line Out 1-8, rear
x Resolution: 24 bit
x Dynamic range (DR): 115 dB RMS unweighted, 118 dBA
x Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 20.8 kHz
x Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45 kHz
x Frequency response @ 192 kHz, -1 dB: 5 Hz - 89 kHz
x THD: < -110 dB, < 0.00032 %
x THD+N: < -104 dB, < 0.00063 %
x Channel separation: > 110 dB
x Maximum output level: +19 dBu
x Output: 6.3 mm TRS jack, servo-balanced
x Output impedance: 75 Ohm
x Output level switchable Hi Gain, +4 dBu, -10 dBV
x Output level at 0 dBFS @ Hi Gain: +19 dBu
x Output level at 0 dBFS @ +4 dBu: +13 dBu
x Output level at 0 dBFS @ -10 dBV: +2 dBV
DA - Stereo Monitor Output Phones (9-12)
As DA, but:
x Output: 6.3 mm TRS stereo jack, unbalanced
x Maximum output level at 0 dBFS, High: +16.8 dBu
x Maximum output level at 0 dBFS, Low: +2 dBV
x Output impedance: 24 Ohm
36.2 MIDI
x 1 x MIDI I/O via 5-pin DIN jacks
x Galvanically isolated by optocoupled input
x Hi-speed mode: Jitter and response time typically below 1 ms
x Separate 128 byte FIFOs for input and output
36.3 Digital
x Clocks: Internal, ADAT In, AES In, word clock in
x Low Jitter Design: < 1 ns in PLL mode, all inputs
x Internal clock: 800 ps Jitter, Random Spread Spectrum
x Jitter suppression of external clocks: > 30 dB (2.4 kHz)
x Effective clock jitter influence on AD and DA conversion: near zero
x PLL ensures zero dropout, even at more than 100 ns jitter
x Digital Bitclock PLL for trouble-free varispeed ADAT operation
x Supported sample rates: 28 kHz up to 200 kHz