User Manual

User's Guide Digiface USB © RME

13.3 Firmware Update

The Flash Update Tool updates the firmware of the Digiface USB to the latest version. It re-

quires an already installed driver.

Start the program Fireface USB Flash.

The Flash Update Tool displays the

current revision of the Digiface USB

firmware and whether it needs an

update or not. If so, simply press the

'Update' button. A progress bar will

indicate when the flash process is

finished (Verify Ok).

After the update the unit needs to be

reset. This is done by temporarily

powering down the Digiface USB. A

reboot of the computer is not

necessary.

When the update fails (status: failure),

the unit's second BIOS will be used

from the next cold boot on (Secure

BIOS Technology). Therefore the unit

stays fully functional. The flash process

should then be tried again on a

different computer.