Brochure

Like all the latest RME interfaces, the Babyface Pro FS also
includes the powerful digital real-time mixer TotalMix FX.
It allows fully independent routing and mixing of input
and playback channels to all physical outputs. Independent
stereo submixes plus a comprehensive Control Room
section offer unrivalled monitoring capabilities and
unsurpassed routing flexibility. The FPGA-based DSP mixer
adds a flexible, 3-band parametric equalizer to all inputs
and outputs. Reverb and delay FX are also available.
The clever user interface is informative and clearly laid
out. It makes access to every feature and configuration
mode of the Babyface Pro FS intuitive and easy to use.
Even in stand-alone mode, routing and mixing of inputs
to outputs directly on the device opens a whole world of
possible applications.
With Class compliancy no proprietary drivers are required,
the device will be directly recognized when the CC mode
is activated. The optional available TotalMix FX for iPad
adds full control over hardware mixer and lets users create,
store and load complete mixes directly from the iPad. The
Babyface Pro FS provides the iPad with the professional
analog I/O connections it lacks on the go.
Babyface Pro’s incredibly efficient design almost never
requires an external power supply on computers – it’s
perfectly stable on USB 3 bus power, and also most USB 2
ports, with no degradation in any technical specification.
This makes it perfect for mobile recording, even with a
pair of your favorite condenser microphones.
All new Improvements were achieved without raising
the units power consumption and offers fully bus-
powered performance.
In the Club, Studio or on the Road -
the perfect mobile Companion
TotalMix FX & TotalMix Remote
The two headphone outputs, offering TRS and
mini-jack sockets in parallel, have completely
separate driver stages to perfectly match low
and high impedance headphones, guaranteeing
pristine sonic results no matter what type of
headphone is used.
The 3.5 mm TRS phones output power rises
to 90 mW. THD of both phones outputs
improved by up to 10 dB. and uses same output
op-amps as ADI-2 Pro now. Finally the output
impedance of 3.5 mm TRS was lowered from
2 Ohms to 0.1 Ohms.
ADI-2 Series
Headphone Power
6.3 mm & 3.5 mm
Headphone Out
NEW
We know the Babyface Pro FS is a well-loved
piece of gear and we want you to keep it.
That’s why we added a K-slot which can be
used with a variety of locking solutions for
theft protection.
NEW