User's Manual

User’s Guide ADI-2 DAC v2.2 © RME

14. SETUP

The key Setup gives access to two top level screens: Options and Load/Store all Settings. Op-

tions has the subpages Remap Keys / Diagnosis, Phones / DSD, Clock and Display.

14.1 Options

14.1.1 Remap Keys / Diagnosis

Subpage Remap Keys /Diagnosis, has the following entries:

Remap Keys

OFF, ON, Remote. Default: Remote. Allows to assign 32 different functions/actions to the four

function keys on the unit and on the remote, or the remote only. Configuration is done via the

following four entries:

VOL (1), I/O (2), EQ (3), SETUP (4). Available functions/actions:

Setup 1 to 9, Mono, Mono to L, Mute, Loudness, EQ enable, B/T enable, EQ+B/T+Ld, Toggle

Ph/Line, Polarity, AutoDark, Dim, Toggle View, Crossfeed 1 to 5, DA SD Sharp, DA SD Slow,

DA Sharp, DA Slow, DA NOS, DA SD LD.

The original function of the key, entering the menu, is still available by pushing the key at the

unit for half a second.

Notes on Remap Keys

Factory default for remote buttons 1 to 4:

1: Mono, 2: Loudness, 3: AutoDark, 4: Dim

Test Results

Please ignore. For internal use only.

SW Version

Shows the current version number and date of the internal

DSP software.