User's Manual

User’s Guide ADI-2 Pro FS - v 2.5

33.4 Digital Outputs

AES/EBU

• 1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992

• Output level 2.7 Vpp

• Format Professional according to AES3-1992 Amendment 4

• Single Wire mode, sample rate 44 kHz up to 200 kHz

SPDIF coaxial

• 1 x RCA, according to IEC 60958

• Output level 0.75 Vpp

• Format Consumer SPDIF according to IEC 60958

• Single Wire mode, sample rate 44 kHz up to 200 kHz

SPDIF optical

• 1 x optical, according to IEC 60958

• Format Consumer (SPDIF) according to IEC 60958

• Sample rate 44 kHz up to 200 kHz

33.5 Digital

• Clocks: Internal, AES In, SPDIF In, ADAT In

• Jitter suppression of external clocks: > 50 dB (2.4 kHz)

• Effective clock jitter influence on AD and DA conversion: near zero

• PLL ensures zero dropout, even at more than 100 ns jitter

• Additional Digital Bitclock PLL for trouble-free varispeed ADAT operation

• Supported sample rates for external clocks: 32 kHz up to 200 kHz

• Internally supported sample rates: 44.1 kHz up to 768 kHz

33.6 General

• Included power supply: external switching PSU, 100 - 240 V AC, 2 A, 24 Watts

• Standby power consumption: 50 mW

• Idle power consumption: 10 Watts, Max. power consumption: 22 Watts

• Idle current at 12 V: 850 mA (10 Watts)

• Dimensions (WxHxD): 215 x 44 x 130 mm (8.5" x 1.73" x 5.1")

• Weight: 1.0 kg ( 2.2 lbs)

• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)

• Relative humidity: < 75%, non condensing