User's Manual

User’s Guide ADI-2 Pro FS - v 2.5

14. SETUP

The key Setup gives access to two top level screens: Options and Load/Store all Settings. Op-

tions has the subpages SPDIF / Remap Keys, Device Mode / DSD, Clock, Phones and Display.

14.1 Options

14.1.1 SPDIF / Remap Keys

Subpage SPDIF / Remap Keys has the following entries:

SPDIF In

Available settings are: Auto, Coax, Optical. Default: Auto.

SRC (Sample Rate Converter)

Available settings are: Off, AES In, SPDIF In. Note: In case a DoP signal (DSD) is detected,

SRC is automatically switched off.

Optical Out

Available settings are: SPDIF, ADAT. While the input adapts to the received signal automati-

cally, the output needs to be switched manually. In Dig Thru mode with an ADAT signal re-

ceived, the output is switched to ADAT automatically with all 8 input channels passed through.

Remap Keys

OFF, ON. Default: OFF. Allows to assign 40 different functions/actions to the four function keys,

configurable via the following four entries:

VOL Key, I/O Key, EQ Key, SETUP Key.

Available functions/actions:

Setup 1 to 9, Mono 1/2, Mono 3/4, Mono to L 1/2, Mono to L 3/4, Mute 1/2, Mute 3/4, Mute all,

Loudness 1/2, Loudness 3/4, EQ In 1/2, EQ Out 1/2, EQ Out 3/4, BT Out 1/2, BT Out 3/4,

EQ+B/T+Ld 1/2, EQ+B/T+Ld 3/4, Toggle Ph/Line, EQ+B/T+Ld 1-4, Polarity, Crossfeed 1-5, DA

SD Sharp, DA SD Slow, DA Sharp, DA Slow, DA NOS, AutoDark, Toggle View..

The original function of the key, entering the menu, is still available by pushing the key for half a

second.

Diagnostic Data

Test Results

Please ignore. For internal use only.

SW Version

Shows the current version number and date of the internal DSP software.