User's Manual

User’s Guide ADI-2 Pro FS – v 2.5

12.2.3 Loudness

Subpage Loudness has the following entries:

Enable

ON, OFF. Default: OFF.

Bass Gain

Maximum Bass amplification. Adjustable between +1 dB

and +10 dB in steps of 0.5 dB. Default: +7 dB

Treble Gain

Maximum Treble amplification. Adjustable between +1 dB

and +10 dB in steps of 0.5 dB. Default: +7 dB

Low Vol Ref

Reference level for highest Bass/Treble amplification, referenced to the Volume set in dB.

Available range is -90 dB to -20 dB. Default: -30 dB. A volume setting below this point will have

maximum Bass/Treble gain, all volume settings above this point will have lower Bass/Treble

gain. 20 dB above the Low Vol Ref setting the Bass/Treble gain will be zero.

12.3 Phones Output 3/4

Subpage Settings has the same settings as listed for Main Output 1/2, plus:

Source

Default: Auto. The source of the output Phones Out 3/4 can

be chosen manually anytime. Available options are: Auto,

AES, SPDIF, Analog, USB 1/2, USB 3/4. Auto here not only

means current or available signal, but also channels 1/2.

Hi-Power

OFF, ON. Default: OFF. Reference level for 0 dBFS is +7

dBu at the output. With Hi-Power on reference level is 15

dB higher, +22 dBu.

Auto Ref Level

ON, OFF. Default: OFF. See chapter 21.3.