User`s guide

User’s Guide TCO

4. Technical Specifications

4.1 TCO-FF

LTC/Video In

• LTC In: BNC, unbalanced

• Level range LTC In: -25 dBu up to +12 dBu

• Video In: BNC unbalanced, switchable termination 75 Ohm

• Format: PAL and NTSC

LTC Out

• BNC

• Output level: +4 dBu, via jumper –7 dBu

• Output impedance: 220 Ohm

• Power supply via ribbon cable, 5 V DC, 100 mA

• Dimensions (WxD): 100 x 75 mm

4.2 TCO-HDSP

LTC In

• BNC, unbalanced

• Level range: -25 dBu up to +12 dBu

Video In (Word Clock In)

• BNC, switchable termination 75 Ohm

• Format: PAL and NTSC

Word Clock In (Video In)

• BNC, switchable termination 75 Ohm

• Transformer coupled, galvanically isolated input

• Not affected by DC-offsets within the network

• Signal Adaptation Circuit: signal refresh through auto-center and hysteresis

• Overvoltage protection

• Level range: 1.0 Vpp – 5.6 Vpp

• Lock Range: 28 kHz – 200 kHz

• Jitter when synced to input signal: < 1 ns

• Jitter suppression: > 30 dB (2.4 kHz)

LTC Out

• BNC

• Output level: +4 dBu, via jumper –7 dBu

• Output impedance: 220 Ohm

Word Clock Out

• BNC

• Max. output voltage: 5 Vpp

• Output voltage @ 75 Ohm termination: 4.0 Vpp

• Output impedance: 10 Ohm

• Frequency range: 28 kHz – 52 kHz

• Power supply via ribbon cable, 5 V DC, 100 mA

• Standard bracket, dimensions PCB (WxD): 98 x 75 mm