User`s guide

User’s Guide HDSP System Multiface © RME

• Resolution AD: 24 Bit

• Signal to Noise ratio: 101 dB RMS unweighted, 106 dBA

• THD: < -107 dB, < 0.00045 %

• THD+N: < -96 dB, < 0.0016 %

• Crosstalk: > 120 dB

• Analog headroom prior to AD conversion: 13 dB

• Frequency response AD @ 44.1 kHz, -0.5 dB: 5 Hz - 20.7 kHz

• Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz - 32 kHz

• Input Line: 1/4" TRS jack, servo balanced

• Input impedance Line: > 5 kOhm

• Input sensitivity through jumper: Lo Gain, +4 dBu, -10 dBV

• Input level for 0 dBFS @ Lo Gain: +19 dBu

• Input level for 0 dBFS @ +4 dBu: +13 dBu

• Input level for 0 dBFS @ -10 dBV: +2 dBV

• Resolution DA: 24 Bit

• Signal to Noise ratio: 108 dB RMS unweighted, 111 dBA (unmuted)

• THD: < - 98 dB, < 0.0013 %

• THD+N: < -91 dB, < 0.002 %

• Crosstalk: > 100 dB

• Maximum output level DA: +19 dBu

• Frequency response DA @ 44.1 kHz, -0.5 dB: 5 Hz – 20.9 kHz

• Frequency response DA @ 96 kHz, -0.5 dB: 5 Hz - 35 kHz

• Output Line: 1/4" TRS jack, servo balanced

• Output impedance Line: 47 Ohm

• Output level through jumper: Hi Gain, +4 dBu, -10 dBV

• Output level at 0 dBFS @ Hi Gain: +19 dBu

• Output level at 0 dBFS @ +4 dBu: +13 dBu

• Output level at 0 dBFS @ -10 dBV: +2 dBV

5.3 Transfer Modes: Resolution / Bits per Sample

ASIO:

• 24 or 32 bit, 4 byte (stereo 8 byte)

This format is compatible with 16-bit and 20-bit. Resolutions below 24-bit are handled by the

audio application.

MME:

• 16 bit, 2 byte (stereo 4 byte)

• 20 bit, 3 byte MSB (stereo 6 byte)

• 20 bit, 4 byte MSB (stereo 8 byte)

• 24 bit, 3 byte (stereo 6 byte)

• 24 bit, 4 byte MSB (stereo 8 byte)

• 32 bit, 4 byte (stereo 8 byte)

Channel Interleave operation is limited to single speed operation and 16 bit.