User`s guide

6 User’s Guide MADI Router © RME
4. Firmware
The MADI Router’s core has been created using programmable logic and is user
updateable. This is achieved by simply saving a firmware update file to a USB stick,
attaching the USB stick directly to the MADI Router’s USB port and then running the
firmware update from the SETUP menu. Please see chapter 7.5.6 for detailed
information.
At the time of writing this manual, the unit is shipped with firmware 1.29. The firmware
version is displayed on the TFT display after powering the unit on.
When updates become available, they are published on http://www.rme-audio.com in
the download section.
Version 1.28: first release
Version 1.29: added transparency settings (see chapter 7.5.3)
Known issues:
In the current MADI TP implementation, the usable bandwidth of the four ports is
reduced to either 56/28/14 audio channels at 48/96/192 kHz sampling frequency, or
64/32/16 audio channels at 44.1/88.2/176.4 kHz sampling frequency. Signals that
exceed these limits are not detected.