User`s guide

User’s Guide MADI Router © RME 27
7.5 SETUP Menu
The setup menu gives access to the individual clock settings for each matrix, the
wordclock output settings and also allows the user to update the firmware of the device.
It can be accessed by pressing the [SETUP] button while the unit displays its IDLE
screen.
7.5.1 Matrix Clocking
The Matrix Clocking section of the setup menu is used to set the correct reference clock
and sample rate settings for each of the four internal matrices and to create one
additional default setting.
Note: This menu can also be quickly accessed by pressing and holding the [SETUP]
button while editing a matrix in the routing section.
Rotating the [OUT] encoder while in the matrix clocking section changes the matrix you
are addressing. The currently addressed matrix is indicated as MX.1, MX.2, MX.3 and
MX.4 in the lower portion of the display.
One additional screen, DEF, allows the user to define default settings that can be
accessed across all matrices.
Rotating the [IN] encoder highlights one of the following settings, which can then be
changed with the same encoder after pushing it once. Pushing the [OUT] encoder leads
back to the item selection.