User`s guide

User’s Guide MADI Router © RME 11
6.3 Loading a Preset From a USB Flash Drive
If you have been provided with a configuration file ROUTING.RME, save it onto a USB
flash drive (do not place it into a folder), then eject the USB Stick from the computer and
connect it to the USB port on the MADI Router.
1. Press [PRESET]
2. Rotate the [IN] encoder to select “Load USB Preset”
3. Press the [IN] encoder
4. Confirm that you want to load the preset by pressing [IN] again
The preset is now loaded and activated. In order to save it into internal storage, follow
the steps below:
1. Press [PRESET]
2. Rotate the [OUT] encoder to select one of the 15 internal presets that you
would like to overwrite
3. Rotate the [IN] encoder to highlight “Save”
4. Press the [IN] encoder twice to confirm overwriting the selected preset.