User`s manual

LOLA: Low Latency Audio Visual Streaming System
Then the output routing shall be correctly configured. Fig 17 shows a correct routing example both for the
analogue channels and for the ADAT channels. Fig 18 shows a configuration where only the 8 ADAT
channels are routed to the output.
The HDSP audio Mixer should also look like in Fig. 19 or 20. Please note that buttons link Out1 Out2 AN1
AN1 shall NOT be in red/pink color, because this means you set the audio card in local audio loop.
Fig 19: The RME main Mixer window (stereo analog in/out setup)