User`s manual

LOLA: Low Latency Audio Visual Streaming System
Figure 14: Hitachi KP=FD30 rear DIP switch setting for progressive scan mode.
Finally, the "shutter mode" field in the software setting menu of the camera should be set to "Ext. Trigger"
Main Menu -> shutter Menu -> Mode: ext trig
Trigger Mode: one trig
Trig polarity: negative
Wen Polarity: positive
Main Menu -> Sub Menu -> Item: preset
Sync/HD out: HD
Sync On G: On
Toshiba IK-TF5 setting for external trigger mode
The Toshiba IK-TF5 color analog camera should be configured according to external trig/shutter mode as
follows:
1. the internal DIP switch (accessed by removing the metal chassis of the camera) should be set in
the HD/VD Input 75 Ohm position (factory setting), as in Fig. 15.
Figure 15: IK-TF5 internal DIP switch setting.
2. the "shutter " Menu fields in the software setting menu of the camera (Fig, 16) should be set
as follows: