User`s guide

User's Guide HDSPe MADI FX © RME

TMS

TMS activates the transmission of

Channel Status data and Track

Marker information from the AES and

MADI input signal.

Redundancy Mode

With redundancy mode active the

number of input channels is reduced

to 66 (AES plus 1x MADI). The two

other MADI ports serve as fail safe

inputs and are used as soon as the

signal on the 'Current MADI Input'

fails. This setting is also a perfect

choice if the card is used as single

MADI I/O, saving resources and

providing simpler channel selection

dialogs.

Mirror MADI1 Output to MADI2/3

This option provides a quick and

simple solution to mirror the first

MADI output to outputs 2 and 3. The

outputs are reduced to 2+2+64

channels (AES, Phones and one

MADI port). All the data routed and

mixed to MADI port 1 is sent to MADI

port 2/3 as well.

Input Status

Displays the state of the current input

signal:

• Clock state (No Lock, Lock, Sync)

• Sample rate (coarse)

• MADI Frame format (48K or 96K)

• Channel format (64 or 56

channels)

Sync Check

RME’s exclusive SyncCheck technology provides an easy to use check and display of the cur-

rent clock status. The clock state column indicates whether no signal (No Lock), a valid signal

(Lock) or a valid and synchronous signal (Sync) is present at each of the digital clock source

inputs.