User`s guide

80
User's Guide Fireface 400 © RME
In stand-alone MIDI mode, the Mackie Control protocol also gives access to some settings of
the Settings dialog:
Element: Meaning in Fireface:
SOLO Ch. 1 Input Level Lo Gain
SOLO Ch. 2 Input Level +4 dBu
SOLO Ch. 3 Input Level –10 dBV
SOLO Ch. 4 Output Level Hi Gain
SOLO Ch. 5 Output Level +4 dBu
SOLO Ch. 6 Output Level –10 dBV
SOLO Ch. 7 Clock Mode AutoSync
SOLO Ch. 8 Clock Mode Master
F9 Phantom Power Mic 1
F10 Phantom Power Mic 2
Two outputs can be controlled in stand-alone MIDI mode using the standard Control Change
Volume (CC 07) and Control Change Pan (CC 10). With this, the most important volume set-
tings of the Fireface are controllable from nearly any MIDI equipped hardware device.
The gains are controlled via different MIDI channels:
Hardware Output (equals third row, volume only)
Analog Out 9+10 (Phones) MIDI channel 1
Analog Out 1+2 MIDI channel 16