Product Label

3
WHEN TO USE
Apply to bare ground or when weeds are present. If weeds are taller than 6 inches, mow or cut down weeds and remove debris be-
fore treatment, and allow for 2 weeks of new growth. If woody vines or brush is mowed or cut, wait until full leaf formation before
treatment.
To prevent growth of weeds under asphalt driveways, play areas, tennis courts and parking areas, apply this product before laying
surfacing materials.
Treat area uniformly to maximize results.
Re-treatment every 6 to 8 months may be necessary in areas of heavy rainfall.
RESTRICTIONS
• Do not apply to or allow product to drift onto desirable plants.
• Only apply to areas where no vegetation is desired for one year.
• Do not apply near bodies of water including, sh pools, ponds, lakes or streams.
• Do not apply over the root systems of desirable plants. For trees and shrubs do not apply closer than twice the distance from the
trunk to the drip line as roots may be within this area.
• Do not apply to slopes in landscape as movement on soil surfaces may damage desirable plants down slope.
• Do not apply next to a fence if desirable vegetation is growing on the other side, or if future planting is intended.
• Do not use before planting lawns, fruits, vegetables, owers, or other plants because this product remains active in soil for up to
one year.
• Do not use on desirable lawns or turf.
• Do not apply when wind speeds are greater than 10 mph.
• Do not apply to powdery, dry or light sandy soils when the soil may be blown by wind. If necessary, soil surface should be settled
by rain or irrigation.
HOW TO APPLY
Apply on a sunny day with temperatures above 60°F. Avoid product runo to nearby desirable plants. In soils with heavy clay, weed
control may exceed one year.
Total Vegetation Control (Bareground)
Use hand operated spray equipment such as backpack sprayers, pump-up sprayers or sprinkling cans, or ATV/Tractor mounted
sprayers. Mix 7.4 . oz. (0.46 pints) of this product with water to produce 1 to 10 gallons of spray solution. Optimum performance will
be achieved from applications to actively growing weeds in early summer.
Uniformly spray the mix over area where total vegetation control and bareground is desired. 7.4 . oz. of product within 1 to 10 gal-
lons of spray solution should be applied to 1,000 square feet.
Maximum application rate of this product is 2.5 gallons per acre per year (7.4 . oz. per 1,000 sq. ft. per year).
Spot Control of Brush, Vines, and Weeds
Use hand operated spray equipment such as backpack sprayers, pump-up sprayers or sprinkling cans, or ATV/Tractor mounted
sprayers. Mix 6 . oz. of this product per 1 gallon of spray solution. Thoroughly and uniformly spray foliage of woody plants to wet.
For optimum performance:
• Apply to actively growing brush, vines and weeds.
• Woody brush and vines are controlled better in late summer and fall after fruit formation.
• If woody vines and brush are mowed or cut, wait until full leaf formation before treatment.
• Do not cut or mow brush, vines or perennial weeds for 2 months following treatment.
Maximum application rate of this product is 2.5 gallons per acre per year (7.4 . oz. per 1,000 sq. ft. per year).