Product Label
2
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Some materials that are chemical-resistant to this product are barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neo-
prene rubber ≥ 14 mils, natural rubber ≥ 14 mils, polyethylene, polyvinyl chloride ≥ 14 mils and viton ≥ 14 mils.
Mixers, loaders, applicators, and other handlers must wear:
• Protective eyewear (goggles, face shield, or safety glasses)
• Long-sleeved shirt and long pants,
• Shoes plus socks,
• Chemical-resistant gloves for all mixers and loaders, plus applicators using handheld equipment
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot
water. Keep and wash PPE separately from other laundry. Discard clothing and other absorbent materials that have been drenched or
heavily contaminated with this product’s concentrate. Do not reuse them.
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands with plenty of soap and water before eating, drinking, chewing gum, using tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
• Remove PPE immediately after handling this product.
• Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Read the entire label before using this product. Use strictly in accordance with label precautionary statements and directions.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers
may be in the area during application. For any requirements specic to your State or Tribe, consult the agency responsible for pesti-
cide regulation.
Do not enter or allow others to enter treated areas until sprays have dried.
Do not use on feed or food crops.
Keep people and pets out of the area during application.
Applicators are required to use a nozzle height below 4 feet above the ground or plant canopy and coarse or coarser droplet size
(ASABE S572) or, if specically using a spinning atomizer nozzle, applicators are required to use a volume mean diameter (VMD) of
385 microns or greater. Applications with wind speeds greater than 10 mph are prohibited. Applications into temperature inversions
are prohibited.
WHERE TO USE
Use on non-crops areas: Industrial sites, Petroleum tank farms, Lumberyards, Manufacturing Sites, Storage Areas, Airports, Roadsides,
Curbs, Sidewalks, Driveways, Parking areas, Brick walks, Gravel Paths, Patios, Vacant lots, Paved areas (including crack and crevice),
Warehouse areas, Urban areas, Recreational areas, Play areas, Tennis courts, Fencerows, Along fences of paddocks, corrals, feedlots,
and livestock holding areas, Hedgerows, Dry Ditchbanks, Around domestic dwellings, Around farm buildings and barns, Agricultural
uncultivated areas, Shelter beds, Farm yards, Farm premises, Outdoor buildings, structures, and shelters such as beef barns, hog barns,
dairy barns, stables, dog kennels and poultry houses, and for establishment and maintenance of wildlife openings
Only apply to locations where no vegetation growth is desired for up to one year.