Users Manual
RM2TRACK-1-0 | ADVANCED SUPPLY CHAIN TRACKING TECHNOLOGY
© System Loco Ltd. 2020
3. Temperature logging and alerts
The RM2TRACK-1-0 has a NIST traceable temperature sensor. With temperature monitoring enabled,
the RM2TRACK-1-0 shall read this temperature sensor at a predefined interval (every X seconds), and
shall log the temperature (every Y minutes) for communication upon its next report. Thresholds (both
lower and upper limits) for temperature can be assigned. If the temperature reading exceeds one of
these limits a report shall be communicated to enable immediate action.
Please Note:
The temperature observed in the pallet may require some settling time before it is consistent with
that of its environment.
4. Logging of short stops
The RM2TRACK-1-0 can be configured to log Cellular and WiFi information observed at short stops (>
S seconds) during the journey. The locations of these ‘stops’ and their duration can be used to
validate/identify routes, traffic, and driving patterns. They will be reported back on the units next
report.
5. Locations of loading/unloading of BLE tagged goods (and/or pallets)
The RM2TRACK-1-0 can be configured to enable BLE tagged goods and other RM2TRACK-1-0 enabled
pallets to be read. This BLE read shall be based upon a change in movement status from moving to
stationary for Z seconds. As such, after a journey has commenced, if there is a short stop, after Z
seconds the RM2TRACK-1-0 shall monitor the presence of other RM2TRACK-1-0 devices (pallets) and
any BLE tags inserted in the goods.
A report will be generated if there is a change in the presence messages observed by the RM2TRACK-
1-0, which in turn can be used to validate locations of loading/unloading.
Please Note:
Initial release of RM2TRACK-1-0 production firmware shall not include BLE broadcast messaging
or BLE reception.
6. Recovery – A-GPS
The RM2TRACK-1-0 can be configured use A-GPS for a location update. It is expected that the use for
A-GPS will be seldom, and only for recovery purposes. It is acknowledged that use of GPS will
significantly reduce battery life.