Manualshelf

Instruction manual

ManualsBrandsRM Solar ManualsConsumer electronicsS Class 20
11121314151617181920
19 20
6.2.5 The Z-prole must be tted to the L-rail using the bottom two holes that are below
the long adjustable slot. Do not tighten fully. TAKE CARE: Make sure frame
connector is tted into the Z-prole properly if extending the frame to accomodate
additonal panels.
6.2.6 Cross measure along the diagonals and check that they are equal. Once you are
satised that each distance (A and B) on the drawing are equal, tighten fully.