User's Manual

7
2. For saving the power capacity of battery, to set the automatic off time in the menu, the
device will turn off automatically when not any operation on the video recorder.
 Camcorder Mode
1. Press REC button to start the video recording, and then press REC button to stop the
video recording. During the process, red icon will flash on the screen.
2. Select flashlight:
Choose the mode of flashlight in the status of video recording by pressing right key. The
sequencing will be forced flash , and no flash .
 Revise the following content in the Menu mode:
Video recording quality: to choose the resolution of video recording
Circulating video recording: to set or shut the circulating video recording, in the status of
circulating video recording, when the capacity of TF card is full, the previous content shall
be covered automatically.
Motion detect: When moving object is detected, the DVR will automatically start
recording , when no moving object is detected, the DVR will continue recording for 10 s
and then power off
Automatic video recording upon start on: when connecting car charger, the device will
start the video recording automatically 3 seconds after start on.
Power on delay: When connecting with car charger, during the set time period (default:10s,)
can continuously detected the power, the DVR will be turned on
Power off delay: When dis-connecting with car charger, during the set time period
(default:30s,) can continuously detected no power, the DVR will be turned off.
Sound recording: select to open or close the microphone.
Language：set language.
Operation